UV Curing Resin
Transparent model resin
100% UV curable, highly transparent, with high printing accurancy, suitable for desktop SLA and DLP 3D printers.
​
Product: 8800
UV curing energy: 8 to 120 mW/cm2
Viscosity: 750 to 950 cps@25℃
Hardness (Shore D): 85
Appearance: Clear & clean liquid
Transparency: Medium transparency
Tensile modulus: 700 to 800 MPa
Tensile strength: 40 to 55 MPa
Elongation at failure: 10 to 20%
Product features: Lower curing energy; general type; medium transparency
Suitable printer: SLA (e.g. DWS 020X, Form1+, Form2, Nobel 1.0A)
​
Product: 8800A
UV curing energy: 30 to 50 mW/cm2
Viscosity: 950 to 1250 cps@25℃
Hardness (Shore D): 89
Appearance: Clear & clean liquid
Transparency: Medium transparency
Tensile modulus: 1100 to 11500 MPa
Tensile strength: 50 to 55 MPa
Elongation at failure: 5 to 6%
Product features: Lower curing energy; high rigidity; medium transparency
Suitable printer: SLA (e.g. DWS 020X, Form1+, Form2, Nobel 1.0A)
​
Product: 8810T
UV curing energy: ≥ 120 mW/cm2
Viscosity: 650 to 950 cps@25℃
Hardness (Shore D): 88
Appearance: Clear light yellow liquid
Transparency: High transparency
Tensile modulus: 950 to 1000 MPa
Tensile strength: 62 to 66 MPa
Elongation at failure: 8 to 9%
Product features: Higher curing energy; high transparency; high rigidity
Suitable printer: SLA (e.g. DWS 020X, Form1+, Form2, Nobel 1.0A)
​
Product: 8810
UV curing energy: ≥ 120 mW/cm2
Viscosity: 300 to 500 cps@25℃
Hardness (Shore D): 85
Appearance: Clear light yellow liquid
Transparency: High transparency
Tensile modulus: 650 to 750 MPa
Tensile strength: 48 to 54 MPa
Elongation at failure: 10 to 12%
Product features: Lower curing energy; high rigidity; medium transparency
Suitable printer: SLA (e.g. DWS 020X, Form1+, Form2, Nobel 1.0A)
​
Product: F brand Clear v.2
UV curing energy: ≥ 150 mW/cm2
Viscosity: 850 to 950 cps@25℃
Hardness (Shore D): 80
Transparency: High transparency
Tensile modulus: 650 to 750 MPa
Tensile strength: 48 to 56 MPa
Elongation at failure: 8 to 10%
Product features: Higher curing energy; high viscosity; high transparency; longer lifetime of PDMS (>1500 layers)
Suitable printer: SLA (e.g. DWS 020X, Form1+, Form2, Nobel 1.0A)
​
​
​
​
​
​
Please do not hesitate to contact us for detailed specifications of each our product and for customerised production
​​Product: Etercure 8900
Viscosity: 220 cps@25℃
Density: 1.108
Hardness (Shore D): 85
Appearance: Clear & clean liquid
Environmental values for use: 25-30 ℃ RH 40 to 60%
Flexural modulus: 1.2 GPa
Flexural strength: 40.3 to 55 MPa
Elongation at failure: 4 %
Product features: Clear and hard, high resolution, fast cure, UV LED (405 & 395 nm), low viscosity and ordour
Application: Model; Prototype; microfluidic channel
Suitable printer: DLP (e.g. Miicraft, Miicraft 125)
​
Direct casting resin
100% UV curable, suitable for desktop SLA and DLP 3D printers.
​
​​Product: 8920A
Colour: Yellow
Viscosity: 100 cps@25℃
Hardness (Shore D): 40 (post-cure property, UV 395 nm, 15 J/cm2)
Specific gravity: 1.089 g/cm3
Z axis resolution: 0.025 mm
CTE (50 to 150℃): 204.7 ppm/℃
CTE (200 to 300℃): -17.8 ppm/℃
Ash residual (700℃/hr): 0.01%
Yield of casting: >90%
Suitable printer: DLP (e.g. Miicraft, Miicraft 125)
​
Product: 8830
Colour: Organe
Viscosity: 368 cps@25℃
Hardness (Shore D): 40 to 45 (post-cure property, UV 395 nm, 15 J/cm2)
Specific gravity: 1.10 to 1.11 g/cm3
Z axis resolution: 0.025 mm
CTE (50 to 150℃): 211 ppm/℃
CTE (200 to 300℃): 84 ppm/℃
Ash residual (700℃/hr): 0.01%
Yield of casting: 95 %
Suitable printer: SLA (e.g. Form1+, Form2, Nobel 1.0A)
​​
RB-UVL-H320W Ink Curing Mashine
* The RB-UVL-H320W is representing a new generation of UV light source system. Taking Advantage of Taiwan's excellent semiconductor technology, we introduce a low-power, long life and pure UV-band UV curing system with the objective to improve the traditional gas discharge lamp.
* Our new generation of UV LED technology provides a new choice of material curing, owning the special feature of immediate on and off function. Time and energy consuming warming up and cooling down procedures are not needed. Our RB-UVL-H320W require minimised space. This special design not only save the operating cost, making the module application more flexible.
* Since RB-UVL-H320W utilises light source of low temperature, the cured substrate is not subject to temperature limits and also will not be deformed, therefore suitable for the soft substrate curing.
​
Specification
UV-LED light source:
Temperature protection function
Dimension - 360 x 83 x 40 mm
Luminous area - 320 x 22 mm
UV-LED Power supplier:
Vm = 105 V, Im = 2A, AC 220V
UV-LED control box:
Dimension - 1536 x 620 x 600 mm
Ice water machine:
Dimension - 1047 x 812 x 489 mm
220V, 50/60 Hz
​
UV Curing Instruments
RB-UV LED Curing Mashine
* Equipped with automatic conveyor belt.
* Suitable for all kinds of UV adhesive, UV ink drying curing.
* Special cooling device, protecting the light source and extending its lifetime.
* Customised UV LED design possible, fitting the actual requirements of the customer!
​
Specification
UV illumination: >100 mW/cm2
Voltage: 220 V
UV wavelength: 365, 385 and 395 nm
UV irradiation area: 200 x 100 mm (customisation possible)
Dimension: 1000 x 310 x 400 mm
Conveyor width: 250 mm
Weight: ca. 30 kg
​
Donna Polymer
R&D Support & Customised Production
